Driver Module
>
Parameters:
Size: 18.5 x 16 mm
Input voltage: 3-10V
Single H bridge output current: 1.5A, can drive 2 dc deceleration motors.
Built-in overcurrent protection, short circuit protection, undervoltage latching and overheating protection. Sleep mode with low power consumption.
..
$12.99
Ex Tax:$12.99
>
Features:
1.Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motors
2.Built-in TSD, without worrying about motor stall
3.Ultra-small size, suitable for assembly and carSpecification:
1.Module supply voltage: DC 2V-10V
2.Signal input voltage: DC 1.8-7V
3.Single ..
$15.99
Ex Tax:$15.99
>
Description:
1. DC Motor Speed Controller,The full name of pulse width modulation is Pulse Width Modulator.Abbreviation PWM.DC motor governor is a device for adjusting the speed of a DC motor.
2. DC motor speed regulation, industrial conveyor belt speed regulation, lighting and lighting me..
$42.99
Ex Tax:$42.99
>
Description:
There are two L9110S motor control chip onboard
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motorFeature:
Work under low static current
Power supply voltage: DC 2.5V - 12V
Each channel has 800mA continuous current output
Low saturation pr..
$14.99
Ex Tax:$14.99
>
Specifications:
Input voltage: AC110/220V
Output voltage: DC12-17V
Output current: 200-300mA(adjustable)
Product size: 55*29*21mm
Working temperature: Ta: 50 TC: 75
Efficiency: ≥90%
Power factor: 0.9
Product application: spotlight PAR light / bulb light / candl..
$14.99
Ex Tax:$14.99
>
Feature:
Working voltage: DC5V-36V
Trigger signal source: digital high level (DC3.3V-20V), can be connected to the microcontroller IO port, PLC interface, DC power supply, etc., can connect PWM signal, support signal frequency 0-20khz
Output: DC5V-36V, continuous current at room..
$9.99
Ex Tax:$9.99
>
Features:
1. As a square wave signal generator,generates a square wave signal used for experimental development.
2. Used to drive a stepper motor for generating a square wave drive signal.
3. Generate adjustable pulse for MCU.
4. Generate adjustable pulse,to control circuitry associated.
5. Si..
$12.99
Ex Tax:$12.99
>
Description:
1. onboard TJA1050 CAN controller interface chip
2. chip commonly used pin has led, convenient connection to use
3. pin 5 v to power supply
4. PCB board size: 22 (mm) x11.5 (mm)
Package included:
10 x TJA1050 CAN Controller Interface Module..
$14.99
Ex Tax:$14.99
>
Specifications:ULN2003A motor driver chipChip all the pins already leads for easy connection to use5-12V power supply4-way signal indicatorXH-5P socket, can be connected directly 28BYJ-48 Model stepper motorPCB board size: 40.5 x 21.3 mmPackage includes:10 x ULN2003 Stepper Motor Driver Board..
$12.99
Ex Tax:$12.99
>
Feature:
Rated Voltage: DC5V-12V
4-phase
Reduction Ratio: 1/64
Step Torque Angle: 5.625°/64
DC Resistance: 200ω±7% (25°)
Insulation Resistance: >10Mω (500V)
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in T..
$7.99
Ex Tax:$7.99
>
Description:
ULN2003 is a high voltage and high current Darlington transistor array products with high current gain, high operating voltage, wide temperature range, with strong load capacity and other characteristics, adapted to the requirements of various types of the high-speed hi..
$7.92
Ex Tax:$7.92
Voltage: 5V(USB)
Precise details>>
Precise details:
Update information: The capacitor is replaced with a chip capacitor.
Feature:
DC5V power supply can be used.
Package includes:
10 x ..
$21.99
Ex Tax:$21.99