CO2 Moss Plant Fish Aquarium Single Pressure Gauge Regulator Manometer Equipment
- Stock: In Stock
- Model: EB003972
- SKU: EB003972
Up to 1500 psi (lb/sq inch).
Compact & sturdy construction.
Single gauge pressure indicator.
Compatible with various size of CO2 Cylinders.
No wrench needed, handy installation. Convenient and simple.
Material: Aluminium Alloy
Color: Silver
Thread Diameter: 22mm/0.87''
Input pressure: 0-10mpa
Intake link: GB cylinder interface G5/8
Outgassing link: M10*1 outer filament
Output pressure: Fine tune out bubble seconds calculation
Usage Introduction:
1. Make sure that the cylinder is stationary and locked tightly.
2. Please do not add any lubricant.
3. Please do not disassemble the device.
4. With the check counter bubble gauge, the reading is accurate, the built-in check reverse backflow can prevent the backflow phenomenon when the cylinder pressure decreases.
Adjustment Method:
Close CO2 gauge, install pressure reducing valve, connect equipment.
Open the relief valve trim switch, and adjust the gas output. Smaller than required.
Adjusting pressure reducing valve 8 hours later.
Warm Tips:
Please note this m22-14 do not fit cylinder in USA and Canada.
The thread is made according to UK, Europe, Japan and Taiwan standard (JIS m22-14), 22mm in diameter.
1 x CO2 Pressure Gauge
1 x Ring Washer
Shipping Time
After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.
The timeline of the whole shipping process is shown below:
The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.
Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.
Shipping Rates
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
| Shipping Method | Shipping Rates | Shipping Times |
| Flat Shipping (Promotion) | $10 | About 5-30 Working Days to Worldwide (Only include Monday to Saturday ) |
Standard Express（0.5KG starting price listed） | Based On Weights | About 5-15 Working Days to Worldwide (Only include Monday to Saturday ) |
Priority Express （0.5KG starting price listed） | Based On Weights | About 3-7 Working Days to Worldwide (Only include Monday to Saturday ) |
In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.
If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!
