ASK Wireless Receiving Module With Decoding EV1527 Encoding Transmitter

Based on 0 reviews. - Write a review

$9.99

Ex Tax: $9.99

Stock: In Stock
Model: EB0045380
SKU: EB0045380

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Features:

The latest anti-lost code self-recovery function solves the trouble of losing code.

The latest anti-interference software is involved to prevent accidental start

Widely compatible, PT2262, PT2260, EV1527, PT2240, etc.

Ultra-wide pulse width range: 105 to 515 oscillating resistors

In jog mode: support combination code

Self-locking mode: support combination code

In the interlock mode: 4 independent open and close, the combination code is closed

You can learn to store up to 24 different remote controls: 24.

Up to seven function options:

1, jog

2, self-locking

3, interlock

4, two-way self-locking + two-way jog

5, two-way self-locking + two-way interlock

6, two-way jog + two-way interlock

7, two-way interlock + two-way interlock

Clear:

Press 8 to learn the code button and the LED goes out. After about 3 seconds, the LED flashes 3 times and clears OK.

Learning the code:

Press the learning button on the board, the LED lights up, and the learning button is released, and the learning pair code mode is entered.

Press any button on the remote control, the LED flashes 3 times, the learning process is OK, and the system automatically exits the learning mode.

If you enter the learning pair code mode, there is no remote control signal, and after 10 seconds, the learning pair code mode is automatically exited.

Output Mode Explanation:

1, self-locking:

Press the same remote control button, press once, the relay is on, press again, the relay is off.

2, interlock:

Press the "A" button on the remote control and the relay will turn on.

Press the "B" button on the remote control and the relay is off.

3. Jog:

Press the “A” button on the remote control, the relay will open, release the “A” button on the remote control, and the relay will be off.

If you keep pressing the "A" button on the remote control, the relay will remain on, when will the remote control be released, and when the relay will be turned off.

Explanation of the use of LED output signal:

When any button of the remote control is pressed, the receiving end decodes and correctly decodes, the LED will output a high level signal 1. When the remote control button is released, the LED output becomes 0.

Model: TX118SA

Transmitting power: 11dbm

Distance: 100-200M

Emission current: 10MA

Standby current: less than 3UA

Transmission rate: up to 10KB/S

RF offset: +/- 7. 5KHZ / narrowband emission

Modulation method: ASK

Working voltage: DC 3V-18V

Optional fixed coding type: PT2262/EV1527/HT6P20B

Customizable special code: MCU type.

Standby current: <3UA

Button data: A, B, C, D a total of 4 groups of inputs, can be combined into 15 groups.

Each module has a separate ID address code

All the four key codes of the modules K1 - K4 are the same.

Foot description:

-: negative power supply

+: Positive power supply, DC 3-18V

K1: External input button, short-circuit to ground to start transmitting data 1, which is equivalent to the A button of the remote control.

K2: External input button, short-circuit to ground to start transmitting data 2, equivalent to the B button of the remote control.

K3: External input button, short-circuit to ground to start transmitting data 3, equivalent to the C key of the remote control.

K4: External input button, short-circuit to ground to start transmitting data 4, equivalent to the D button of the remote control.

ANT: Transmitting antenna

Note:

(1) This product is a CMOS device and should be protected against static electricity during storage, transportation and use.

(2) The device should be grounded well when in use.

ASK-Wireless-Receiving-Module-With-Decoding-EV1527-Encoding-Transmitter-1405047

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Transmitter