5pcs 24V XH-W3002 Micro Digital Thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1

Based on 0 reviews. - Write a review

$27.99

Ex Tax: $27.99

Stock: In Stock
Model: EB0045816
SKU: EB0045816

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Feature:

Product Name: Microcomputer Temperature Controller

Product model: XH-W3002

Temperature range: -50~110°C

Temperature control range: -50~110°C

Temperature measurement accuracy: +-0.2 °C

Temperature control accuracy: +-0.1 °C

Temperature probe: NTC10K (B3950) 1 meter waterproof probe

Supply voltage: DC12V/DC24V/AC220V

Output power: DC24V: 240W

Output type: direct output

Appearance size: 60 x 45 x 31mm

Opening size: 73mm (aperture 4mm)

Package includes:

5 x Microcomputer Temperature Controller

Wiring:

5pcs-24V-XH-W3002-Micro-Digital-Thermostat-High-Precision-Temperature-Control-Switch-Heating-and-Coo-1637894

Key Description:

Up key: Short press to display the starting temperature, long press to set the starting temperature.

Down button: short press to display the stop temperature, long press to set the stop temperature.

Shutdown button: Press to turn off the thermostat, and then press to turn on the thermostat.

Code	Code description	Setting range	Factory setting
P0	Starting temperature	-50~110°C	25
P1	Stop temperature	-50~110°C	40
P2	Temperature correction	-10~10°C	0°C
P3	Delayed start	0-10 minutes	0

P0. Set the startup temperature:

Press the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.

P1. Set the stop temperature:

Press the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.

P2. Set the temperature correction:

In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note: In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)

P3. Set the delay start:

In the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note: Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn't need delay function, skip directly.

Instructions:

Start temperature

Start temperature > stop temperature = cooling mode (output is connected to the cooling unit)

1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)

2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.

3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.

4. Restore the factory: Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.

5. Press the power off button to turn off the thermostat and press to turn on the thermostat.

Tips:

888: In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.

LLL: Describe the sensor is open circuit, repair the sensor, or replace the sensor

HHH: The sensor is short circuit.

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Thermostat