2500W ZVS Induction Heating Board Module Flyback Driver Heater+Tesla Coil+Dual fan

Based on 0 reviews. - Write a review

$108.17

Ex Tax: $108.17

Stock: In Stock
Model: EB006494
SKU: EB006494

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Name: 2500W ZVS Induction Heating Board Module Flyback Driver Heater+Tesla Coil+Dual fan

If you need suitable DC power supply for this product , recommend ID:1611455

Product Description

Material: metal + plastic

Color: Black

Power supply:

New style :AC 100-220V Adapter

Old style: Mainboard Input voltage: 12V-48 recommended above 36V

Power requirements: less than 12V ≥ 10A 15V or more ≥ 20A

NOTE:New style and Old style shipped by randomly!!!

It doesn‘t affect the performance of product.!!!

Maximum power: 2500W

Maximum current: 50A

Size: 25x12x9cm (Manual measurement, error about 3mm, please understand)

Features:

●The heating plate is made of military-grade PCB, and the performance is stable;

●The power line is fully covered with copper cover design, which can increase the current and heat generation;

●Using oversized and large power heat sink to dissipate heat better;

●The output terminal uses three M4 copper columns in parallel, which can be connected to other outputs such as high voltage package;

●Using six IRFP260 and 12 capacitors in parallel resonance, the power is high and the efficiency is high;

[Buyers must see / pay special attention]

Note:

The power of heating is very large, except that the plate and components are hot, and the heat of copper tube is very high. The buyer can prepare water cooling system separately, can buy a small water pump and 2 meters of inner diameter Of 4mm rubber hose.

2. You must pay attention to when using switch power supply, because the high-power switching power supply usually have soft start function, the same output voltage is slowly rising, and if the voltage rise to 10V before By lacking voltage lead to circuit can't afford to vibrate, so that the two MOS tube conduction and burned components at the same time, so be sure to switch the power supply voltage stability and then access the induction heating circuit.

3. When heating the metal objects do not to heat too large metal, otherwise it may be overloaded with power, please add a 35A fuse or ammeter and air switch will be better. (package does not inclues)

4. Although this drive plate can withstand more than 40A current, but it is recommended that not exceed 48V 35A to prevent accidents and damage.

5. Package comes with heating circle diameter is 60 mm, design voltage is 36V, if you use more than 40 voltage power supply shall be used for inner diameter 70 mm above diameter heating ring, water pump use 12V dc power supply, please use separate Power supply voltage regulator module to avoid burn out fan and water pump.

6. The minimum input voltage of the module is 12V, it doesn't mean all the 12V power supply can be used, some novice buyers may use a smaller power supply. This module has specific voltage and current requirements, the voltage 12V current must Be more than 10A power supply can be used, if the power is too low will lead to the power output is greatly reduced, when the voltage is lower than 12V, it will lead to two MOS at the same time conduction, will burn MOS tube ;

7. If you find that the MOS tube fever, then the first thing to consider whether the power output meets the requirements.

8. Do not empty the board, otherwise it will issue a very high frequency of noise, and then MOS tube will burn out.

9. Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small heating almost no response, and 12V power supply easily lead to the power supply output voltage decreases, below 12V is very dangerous

10. Induction heating power is great, so fever is normal, be sure to do a good job of cooling.Induction heating, the power recommended more than 48V 50A switching power supply. More than 24V power supply, then more than 20A power supply, the greater the voltage, the greater the current, the greater the heating power, heating faster.

Application: high frequency induction heating plate

How to use? (Instructions)

For induction heating, it is recommended to use a switching power supply of 48V50A or higher. If the power supply is 24V or more, a power supply of 20A or more is required. The higher the voltage, the larger the current, the higher the heating power, the faster the heating speed.

Package include:

● 1 x PCB board (with dual fans)

●1 x 48V copper tube

2500W-ZVS-Induction-Heating-Board-Module-Flyback-Driver-HeaterTesla-CoilDual-fan-1403168

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Fan